Binkley & Hurst leaf logo

0

Please note that the Steiger Series tractors are currently unavailable for sale at Binkley & Hurst.

2017 CASE IH SC101 at www.binkleyhurst.com2017 CASE IH SC101 at www.binkleyhurst.com
2017 CASE IH SC101 at www.binkleyhurst.com2017 CASE IH SC101 at www.binkleyhurst.com
2017 CASE IH SC101 at www.binkleyhurst.com2017 CASE IH SC101 at www.binkleyhurst.com
All
Photos
Videos

For Sale Price:Call

Description

Available in three widths, the SC101 allows for custom-built windrows or swaths.

Self-propelled Capacity and Maneuverability
For self-propelled capacity and maneuverability at a pull-type price, fit an HDX 2 Series sicklebar header to the SC101 . Choose one of three cutting widths: 14 ft. 3 in. (4.34 m), 16 ft. 3 in. (4.95 m) and 18 ft. 3 in. (5.56 m). Features center-pivot design with hydraulic tongue swing and 1,000-rpm hydrostatic drive.

Turn Acres of Standing Crop into High-Quality Hay
You’ll quickly appreciate the smooth-cutting, high performance of the Case IH sicklebar mower conditioner. Rugged five-bat, all-steel
reels are fully adjustable to smoothly feed even the thickest crops to the auger.

Fit an HDX 2 series sicklebar header to an SC101 mower conditioner and you’ll get self-propelled capacity and maneuverability at
a pull-type price. HDX 2 series delivers smooth, clean cutting in three cutting widths from 14 ft. 3 in. (4.34 m), 16 ft. 3 in. (4.95 m) and
18 ft. 3 in. (5.56 m).

Dimensions

Transport/Overall width [defined by header width]
14ft header: 16 ft. 3 in. (4.95 m) | 16ft: 18 ft. 3 in. (5.56 m) | 18ft: 20 ft. 3 in. (6.17 m)
Overall length
14 ft and 16 ft: 25 ft. 11 in. (7.90 m) | 18 ft: 29 ft. 7 in. (9.02)
Overall height, operating position
73 in. (1854 mm)
Overall height, transport position
80 in. (2032 mm)
Track width
152 in. (3861 mm)
Ground clearance to guard tips
25 in. (635 mm)

Crop Discharge

Swath width
96 in. (2438 mm)
Windrow width
38–60 in. (965-1524 mm)
Adjustments
Swath gate adjusted lowered provides 96 in. swath. Swath gate raised allows adjustable windrow shield to produce windrow widths between 38 in. and 60 in.

Weight

Shipping weight, less header
14 ft: 3,522 lbs. (1598 kg) | 16 ft: 3,554 lbs. (1612 kg) | 18 ft: 3,668 lbs. (1664 kg)
Operating weight, less header
14 ft:3,347 lbs. (1518 kg) | 16 ft: 3,379 lbs. (1533 kg) | 18 ft: 3,493 lbs. (1584 kg)

Tractor Requirements

Remotes
2
Relief pressure
1750 psi (121 bar)
Minimum drawbar
Category II
7-pin electrical connector
Required for lighting
Hitch type
Swivel ball in standard hitch extension w/clevis on implement tongue

Tires

Size, ply rating and type
31 x 13.50-15, 8 ply, I1, agricultural implement rib tire
Raise/lower circuit
Single-acting, master/slave, 2.5 in. (63.5 mm) bore x 10 in. (254 mm) stroke
Tilt circuit
Single-acting, 2 in. (50.8 mm) bore x 10 in. (254 mm) stroke

Hydrostatic Header Drive System

Pump drive speed
1000 rpm only
Pump type
Fixed displacement, gear-type, w/thrust bearing on input shaft
Pump drive
Telescoping PTO, category 3 w/standard U-joints
Pump mount
Swivel mounted on 1.75 in. (44.5 mm) composite non-greasable busing w/ steering link attached to hitch extension 80 in. (2032 mm)
Flow @ rated speed
29 gpm (110 lpm)
Relief valve setting
3300 psi (228 bar)
Motor type
Fixed displacement, gear-type
Reservoir capacity
28 gal. (105 l)
Field Operating Speeds
0-8 mph (0-13 kph)
Transport Operating Speeds
20 mph (32 kph)

Safety Features

Lighting
Brake/flasher/turn signal lights – standard
Transport swing lock
Standard mechanical stop w/spring-loaded locking pin to facilitate ease of actuation
Transport lift lock
Standard mechanical lift cylinder stops
Safety chain
Standard